Top Page > Product Information > Nitrogen Gas Generator > Nitrogen Gas GeneratorMNT SERIES(2.5NL/min-20NL/min)
Nitrogen Gas Generator
- Nitrogen Gas Generator
MNT SERIES(2.5NL/min-20NL/min) - The adsorbent used for the equipment has characteristics to selectively adsorb a large amount of oxygen in the initial stage of adsorption and to adsorb a larger amount in the high-pressure condition. Therefore, it can adsorb the oxygen gas, carbon dioxide gas, and moisture in a short time from the air introduced into an adsorption vessel and can obtain high-purity nitrogen gas as product gas from the top of the adsorption vessel. On the other hand, the adsorbent which has adsorbed oxygen gases can be easily removed/and regenerated by reducing the pressure to atomospheric pressure. Therefore, high-purity nitrogen gas can be produced continuously by alternately pressurization and desorption in two adsorption vessels.
Features
♦ Easy handling because of all automatic operation
♦ Compact design requiring small space
♦ Installed anywhere if power is supplied.
♦ High-purity and dry (–55°C or less) nitrogen gas can be obtained.
♦ Pressure vessels are made from aluminium.
♦ Used in a room without anxiety because of quiet operation sounds
♦ Only pressing button enables gas to be supplied after several minutes.
♦ Product gas purity 99.999% is available.
♦ Compact design requiring small space
♦ Installed anywhere if power is supplied.
♦ High-purity and dry (–55°C or less) nitrogen gas can be obtained.
♦ Pressure vessels are made from aluminium.
♦ Used in a room without anxiety because of quiet operation sounds
♦ Only pressing button enables gas to be supplied after several minutes.
♦ Product gas purity 99.999% is available.
Applications
♦ Substitution for cylinder
Carrier gases for various analysis instruments or scientific instruments, and purge gases used in a laboratory
♦ For heat treatment
Blanket gases for metal heat treatment, purge gases, blanket gases for ceramics and ferrite burning, oxidization-protection gases when in welding and soldering
♦ For semi-conductor industries
♦ CA storage gases for fruits and vegetables
♦ Non-oxidization seal gases foods
Filling-up gases for medicine packing, carrier gases for welding, reduction of oxygen scavenger
♦ Explosion-proof or rust-prevention gases
Purge gases for tank, reaction vessel, piping, seal gases for flammable materials, rust-prevention gases for communication cables and various tanks
♦ Seal gases for shipping
♦ Blanket gases for synthetic fibers and melted spinning
Carrier gases for various analysis instruments or scientific instruments, and purge gases used in a laboratory
♦ For heat treatment
Blanket gases for metal heat treatment, purge gases, blanket gases for ceramics and ferrite burning, oxidization-protection gases when in welding and soldering
♦ For semi-conductor industries
♦ CA storage gases for fruits and vegetables
♦ Non-oxidization seal gases foods
Filling-up gases for medicine packing, carrier gases for welding, reduction of oxygen scavenger
♦ Explosion-proof or rust-prevention gases
Purge gases for tank, reaction vessel, piping, seal gases for flammable materials, rust-prevention gases for communication cables and various tanks
♦ Seal gases for shipping
♦ Blanket gases for synthetic fibers and melted spinning
Standard Specifications
[O2<1% SERIES]
| Model | Generating Volume (NL/MIN) | Outlet Pressure (MPa) | Dimension W×D×H (mm) | Weight (kg) | Electric Power Consumed (kWh) |
|---|---|---|---|---|---|
| M2NT-10 | 10 | 0.3 | 450×655×750 | 75 | 0.5 |
| M2NT-20 | 20 | 450×655×1000 | 120 | 1.2 |
[O2<0.1% SERIES]
| Model | Generating Volume (NL/MIN) | Outlet Pressure (MPa) | Dimension W×D×H (mm) | Weight (kg) | Electric Power Consumed (kWh) |
|---|---|---|---|---|---|
| M3NT-5 | 5 | 0.3 | 450×655×750 | 75 | 0.5 |
| M3NT-10 | 10 | 450×655×1000 | 120 | 1.2 |
[O2<0.01% SERIES]
| Model | Generating Volume (NL/MIN) | Outlet Pressure (MPa) | Dimension W×D×H (mm) | Weight (kg) | Electric Power Consumed (kWh) |
|---|---|---|---|---|---|
| M4NT-2.5 | 2.5 | 0.3 | 450×655×750 | 75 | 0.5 |
| M4NT-5 | 5 | 450×655×1000 | 120 | 1.2 |
The Pressure Vessels of PSA are complied with Malaysia and China Pressure Vessel Regulations.
Please consult with our sales division about PSA for overseas.
Remarks:The size and weight of PSA for overseas is not the same with this leaflet.
Please consult with our sales division about PSA for overseas.
Remarks:The size and weight of PSA for overseas is not the same with this leaflet.
About this commodity
